An efficient and selective way to new highly functionalized coronands or spiro derivatives using ultrasonic irradiation

A new, selective, straightforward and general method for preparation of highly functionalized coronands or spiro derivatives bearing 1,2-dihydroxyacetophenone unit, under conventional conditions and ultrasonic irradiation, is reported. The reaction setup involves only one step, acylation of an α-chloro-3,4-dihydroxyacetophenone with phthaloyl dichloride derivatives. 1,3- and 1,4-Phthaloyl dichloride derivatives leads to coronands only, while 1,2-phthaloyl dichlorides lead either to coronands or to spiro derivatives. A feasible explanation for the different behavior between conventional and ultrasound methods could be the different reaction mechanism involved in the two procedures: tetrahedral nucleophilic substitution under conventional conditions and radical substitution under ultrasound. Ultrasound induces a remarkable acceleration of the reactions (from days to minutes) and, most significantly, the yields are twice as high. A feasible explanation for the efficiency of the reactions under ultrasonic irradiation is presented.     

Time optimal boundary controls for the heat equation

The fact that the time optimal controls for parabolic equations have the bang–bang property has been recently proved for controls distributed inside the considered domain (interior control). The main result in this article asserts that the boundary controls for the heat equation have the same property, at least in rectangular domains. This result is proved by combining methods from traditionally distinct fields: the Lebeau–Robbiano strategy for null controllability and estimates of the controllability cost in small time for parabolic systems, on one side, and a Remez-type inequality for Müntz spaces and a generalization of Turán?s inequality, on the other side.     

Removal of uranium(VI) and thorium(IV) ions from aqueous solutions by functionalized silica: kinetic and thermodynamic studies

Adsorption behavior of uranyl and thorium ions from synthetic radioactive solutions onto functionalized silica as sorbent has been investigated. The effect of contact time, initial concentration of radioactive solutions, sorbent mass, pH value and temperature on the adsorption capacity of the sorbent was investigated. Negative values of Gibbs free energy of adsorption suggested the spontaneity of the adsorption process on both functionalized silica with –NH₂ groups and with –SH groups. Positive values obtained for ΔH° indicates that the adsorption is an endothermic process. The adsorption isotherms were better fitted by Freundlich model and the adsorption kinetic was well described by the pseudo-second order equation. Desorption studies indicated that the most favorable desorptive reagents for UO₂ ²⁺ is HNO₃ 1 M and for Th⁴⁺ is EDTA 1 M solutions.     

Influence of mechanical activation time,annealing, and Fe/O ratio on Fe3O4/Fe composites formation from Fe2O3 and Fe powders mixture

Commercially, iron (α-Fe) and hematite (α-Fe₂O₃) powders were used for the synthesis of composite powders of Fe₂O₃/Fe type by mechanical milling. Several ratios of Fe₂O₃/Fe were chosen for the composite synthesis; the atomic percent of oxygen in the starting mixtures ranged from 21 to 46 %. The Fe₂O₃/Fe composite samples with various Fe/O ratios were milled for different milling times. The milled composite samples were subjected to the heat treatments in argon up to 900 °C. During the heat treatment at temperatures that do not exceed 550 °C, Fe₃O₄/Fe composite particles are formed by the reaction between the Fe₂O₃ and Fe. Further increase of the heat treatment up to 700 °C leads to the reaction of the Fe₃O₄/Fe composite component phases, resulting thus in the formation of FeO/Fe composite. The heat treatment up to 900 °C of the Fe₂O₃/Fe leads to the formation of a composite of FeO/Fe₃O₄/Fe independent of the milling time and Fe₂O₃/Fe ratios. The onset temperatures of the Fe₃O₄ and FeO formations decrease upon increasing the milling time. Another important aspect is that, in the case of the same milling time but with a large amount of iron into the composite powder the formations temperatures of Fe₃O₄ and FeO are also decreasing. The influence of the mechanical activation time, heat treatment temperature, and Fe/O ratio on the formation of the (Fe₃O₄, FeO)/Fe composite from Fe₂O₃+Fe precursor mixtures was studied by differential scanning calorimetry and X-ray diffraction techniques.     

Electrocatalytic oxidation of NADH at carbon paste electrodes modified with meldola blue adsorbed on zirconium phosphate: effect of Ca2+ and polyethyleneimine

The basic electrochemistry of carbon paste electrodes modified with Meldola Blue adsorbed on zirconium phosphate (MB-ZP-CPEs) and their ability to oxidize NADH have been investigated. Three types of carbon powder (graphite and glassy carbon-type Sigradur K and G) were used to obtain MB-ZP-CPEs. On comparing cyclic voltammograms recorded at MB-ZP-CPEs, similarly prepared from the three different carbon powders, those made with Sigradur K exhibited the lowest background current, and the best MB electrochemistry, seen as the highest peak intensities and smallest peak separation. Using MB-ZP-CPEs based on Sigradur K a study on NADH oxidation was done focusing on the effect of the Ca²⁺ concentration in the contacting solution and on the addition of polyethyleneimine (PEI) into the paste. It can be stated that MB-ZP-CPEs based on Sigradur K and containing 1.23% (w/w) PEI exhibited the best behavior for NADH oxidation, measured by the highest electrocatalytic rate constant (8.2×10³ M^–1 s^–1).     

Precipitation of dispersed silver particles using acetone as reducing agent

A novel environmentally friendly solution-based method for preparing dispersed silver particles is described. The simple and convenient approach consists in heating silver oxide particles dispersed in a highly alkaline water/acetone mixture. The data presented clearly show that acetone reduces completely and rapidly Ag(2)O particles to metallic silver at 60°C. A mechanism explaining the provenance of the electrons responsible for the reduction of silver is proposed.     

Preparation and characterization of polyvinyl alcohol—chitosan biocompatible magnetic microparticles

This work addresses the obtaining of biocompatible magnetic polyvinyl alcohol—chitosan microspheres, specifically tailored/functionalised to bind directly blood toxins using an emulsion crosslinking preparation method. The following synthesis parameters were studied: water to oil phase ratio, polyvinyl alcohol molecular weight, chitosan to polyvinyl alcohol weight ratio, surfactant composition and concentration of the crosslinking agent. These parameters were optimized for producing a high yield of colloidally stable and uniformly sized particles with significant magnetization of saturation, bearing surface amino groups that can be further used to bind blood toxins directly. The particles were characterized regarding their size distribution and surface charge (laser diffraction analysis), morphology (transmission electron microscopy), magnetic properties, chemical composition (Fourier transform infrared spectroscopy) and concentration of the surface amino groups (conductometric titration).     

Structural investigations of Ge nanoparticles embedded in an amorphous SiO2 matrix

Transmission electron microscopy and X-ray photoelectron spectroscopy analyses are performed to investigate Ge nanoparticles embedded in an amorphous SiO₂ matrix. GeSiO thin films are prepared by two methods, sol?Cgel and radio frequency magnetron sputtering. After the deposition, the sol?Cgel films are annealed in either N₂ (at 1 atm and 800 °C) or H₂ (at 2 atm and 500 °C), and the sputtered films in H₂ (at 2 atm and 500 °C), to allow Ge segregation. Amorphous Ge-rich nanoparticles (3?C7 nm size) are observed in sol?Cgel films. Crystalline Ge nanoparticles in the high pressure tetragonal phase (10?C50 nm size) are identified in the sputtered films. The size of the nanoparticles increases with Ge concentration in the volume of the film. At the film surface, the Ge concentration is much larger that in the volume for both sol?Cgel and sputtered films. At the same time, at the film surface, only oxidized Ge is observed.     

Fan’s inequality in geodesic spaces

Fan’s minimax inequality is extended to the context of metric spaces with global nonpositive curvature. As a consequence, a much more general result on the existence of a Nash equilibrium is obtained.     

Laboratory analyses of 60Co2+, 65Zn2+ and (55+59)Fe3+ radiocations uptake by Lemna minor

The living Lemna minor vascular plant and two different sorbents obtained by chemical treatment of this plant were tested to study the removal process of 60Co2+, 65Zn2+ and (55+59)Fe3+ from low radioactive wastewaters. The most effective sorbent was the protonated biomass, indicating the decisive contribution of the complexation process in the assembly of the uptake mechanisms. The uptake performance of the biosorbent obtained from the L. minor can be increased with approximately 20% by treatment with 0.1 N HNO3. Concerning the metabolically active mechanism, it can be notice the slow elimination of 65Zn2+ and the continuously increase of (55+59)Fe3+ uptake degree. The Na2CO3 generated in situ in systems participates to a double exchange reaction with the metallic cations during the uptake. 60Co2+, 65Zn2+ and (55+59)Fe3+ radiocations prefer for coordination N-donor ligands at the expense O-donors ones.